ARDEX WA™ High-performance, 100% Solids Epoxy Grout and Adhesive is a solvent-free, two-component epoxy grout and adhesive. ARDEX WA is suited particularly for tile installations in industrial areas, swimming pools, hot tubs, showers, bathrooms, dairies, meat packing facilities, breweries, hospitals and any installation requiring high standards of hygiene and chemical resistance. Tile installed with ARDEX WA can be grouted in 12 hours.

Key Features

• Grout joints up to 1/2” (12 mm) wide
• Use for setting all types of tile
• Use where maximum chemical resistance and/or hygiene and cleanliness are required
• Use for applications in food processing, industrial, institutional and commercial facilities
• Ideal for swimming pools, hot tubs and other wet areas, can be submerged after only 7 days
• Very easy to clean with only water
• Use for interior and exterior floors and walls
• Waterproof and frost resistant
• Solvent free, low VOC’s

Installation

Mixing Ratio:

2 1/4 – 2 1/2 quarts (2.1 – 2.3 L) of water to one 25 lb. (11.3 kg) bag.

28 – 32 oz. (0.8 – 0.9 L) of water to one 10 lb. (4.5 kg) box.

*For smaller batches, use 4 parts powder to 1 part water by volume

Performance

Pot Life: Approx. 30 minutes
Working Time: Approx. 30 minutes
Open to Traffic: 90 minutes
Brinell Hardness
1 Day: 5,000 psi, 351.5 kg/sq. cm / 34.5 MPa
3 Days: 6,500 psi, 457. kg/sq. cm / 44.9 MPa
7 Days: 8,000 psi, 562.4 kg/sq. cm / 55.2 MPa
28 Days: 8,700 psi, 611.6 kg/sq. cm / 60. MPa
VOC: 0
Packaging: 25 lb. (11.3 kg) net weight per bag. 10 lb. (4.5 kg) net weight per box