ARDEX 100% Solids Epoxy Adhesive is a solvent-free, two-component epoxy adhesive. This adhesive is suited particularly for tile installations in industrial areas, swimming pools, hot tubs, showers, bathrooms, dairies, meat packing facilities, breweries, hospitals and any installation requiring high standards of hygiene and chemical resistance.

Key Features

• Use for installing all types of tile including glass tile, moisture
  sensitive marble and agglomerate tiles and resin-backed tile,
  mosaics and stone
• Non-staining on white and light-colored marble
• Use where maximum chemical resistance is required
• Use for applications in food processing, industrial, institutional and commercial facilities
• Ideal for swimming pools, hot tubs and other wet areas, can be submerged after only 7 days
• Very easy to clean with only water
• High bond strength
• Solvent free, low VOCs
• Available in white only

Installation

Mixing Ratio: Mix all of “B” into “A”

Coverage (When used as a setting adhesive):

1/4″ x 1/4″ x 1/4″ sq. Notch trowel
For tiles larger than 4 sq. in. (25 cm²)
19.5 sq. ft. / 8.8 lbs. tub (1.8 m² / 4 kg)

3/16” x 5/32” V-Notch trowel
For tiles 4 sq. in. (25 sq. cm) or less
32 sq. ft. / 8.8 lbs. tub (3 sq. m / 4 kg)

Pot Life: Approx. 40 minutes
Working Time: Approx. 1 hour
Open Time: Approx. 1 hour

Performance

Time to Grout: 12 hours
Open to Traffic: Light foot traffic: 12 hours; Full traffic loads: 2 days
Limited chemical resistance and submerged applications: 7 days;
VOC: 2.67 g/L per ASTM D2369
Packaging:
“Part A” Resin (6.6 lbs./3 kg)
“Part B” Hardener (2.2 lbs./1 kg)